Establishing a direct connection via WLAN

You have several options to connect the product to a smart device. The procedure can be different depending on the devices. If the procedures described do not apply to your device, establish the direct connection via Wi-Fi as described in the manual of your device.

The following connection options ar available:

  • Connection to SMA 360° App

  • Connection with WPS

  • Connection with Wi-Fi network search

Requirements:

  • The product must be commissioned.

  • A smart device (e.g. smartphone, tablet or laptop) must be available.

  • The respective latest version of one of the following web browsers must be installed on the smart device: Chrome, Edge, Firefox or Safari.

  • JavaScript must be enabled in the web browser of the smart device.

SSID, IP address and WLAN password

  1. SSID in WLAN: SMA[serial number] (e.g. SMA0123456789)
  2. Device-specific Wi-Fi password: see WPA2-PSK on the type label of the product
  3. Standard access address for a direct connection via WLAN outside of a local network: http://smalogin.net or 192.168.12.3

Connection to SMA 360° App

Requirements:

  • A smart device with camera (e.g. smartphone or tablet) must be available.

  • The SMA 360° App must be installed on the smart device.

  • An user account for Sunny Portal must already exist.

Procedure:

  1. Open the SMA 360° App and login with the Sunny Portal account details.
  2. Select QR-Code Scan in the menu.
  3. Scan the QR Code on you product via the SMA 360° App.
  4. The smart device automatically connects to the product. The web browser of your smart end device opens and the welcome or login page of the user interface is displayed.
  5. If the web browser of the smart end device does not open automatically and the welcome or login page of the user interface is not displayed, open the web browser and enter http://smalogin.net in the address bar.

Connection with WPS

Requirement:

  • The smart device must have a WPS function.

Procedure:

  1. Enable WPS function on the product. Tap on the enclosure lid of the product twice.
  2. The blue LED flashes quickly for approx. two minutes. The WPS function is active during this time.
  3. Enable the WPS function on your smart device.
  4. Open the web browser of your smart end device and enter http://smalogin.net in the address bar.

Connection with Wi-Fi network search

  1. Search for Wi-Fi networks with your smart device.
  2. Select the SSID of the product SMA[serial number] in the list with the detected Wi-Fi networks.
  3. Enter the device-specific Wi-Fi password (see WPA2-PSK on the type label).
  4. Open the web browser of your smart end device and enter http://smalogin.net in the address bar.
  5. The welcome or login page of the user interface is displayed.
  6. If the login page of the user interface does not open, enter the IP address 192.168.12.3 or, if your smart device supports mDNS services, SMA[serial number].local or http://SMA[serial number] in the address bar of the web browser.
    Establishing a connection to the user interface
    Establishing a Connection via Ethernet in the local network