Mount the product.
Qualified person
Additionally required mounting material (not included in the scope of delivery):
For transport with a hoist: 2 eye bolts (M8)
For mounting:
2 screws that are suitable for the support surface and the weight of the inverter
2 washers suitable for the screws
Where necessary, 2 screw anchors suitable for the support surface and the screws
To protect the product against theft: 1 padlock suitable for outdoor use. The padlock shackle should have a 7.5 mm diameter.
CAUTION
Risk of injury due to weight of product
Injuries may result if the product is lifted incorrectly or dropped while being transported or mounted.
- Transport and lift the product carefully. Take the weight of the product into account.
- Use the carrying handles or hoist when transporting the product. To attach the hoist system, eye bolts must be screwed into the threads provided, which are located on the right and left of the product's mounting lugs.
- Wear suitable personal protective equipment for all work on the product.
Procedure:
- Align the wall mounting bracket horizontally on the wall and mark the position of the drill holes.
- Set the wall mounting bracket aside and drill the marked holes.
- Insert screw anchors into the drill holes if the support surface requires them.
- Secure the wall mounting bracket horizontally using screws and washers.
- Hook the inverter into the wall mounting bracket.
- Ensure that the inverter is securely in place. The inverter is correctly hooked in when the indentations in the wall mounting bracket and the mounting tab line up.
- Secure the inverter to the wall mounting bracket on both sides with an M5x14 screw each. Insert screws into the screw holes on the left and right tab of the wall mounting bracket and tighten them (TX25, torque: 1.5 Nm).
- To secure the inverter against theft, guide the padlock shackle through the metal tab of the wall mounting bracket and through the mounting tab of the inverter before closing it.
- Keep the key of the padlock or the number combination for opening it in a safe place.
