LED Signals
The LEDs indicate the operating state of the product.
LED signal | Explanation |
|---|---|
The green LED is flashing (2 s on and 2 s off) | Waiting for feed-in conditions The conditions for feed-in operation are not yet met. As soon as the conditions are met, the product will start feed-in operation. |
The green LED flashes quickly | Update of central processing unit The central processing unit of the product is being updated. |
The green LED is glowing | Feed-in operation The product feeds in with a power of at least 90%. |
The green LED is pulsing | Feed-in operation The product is equipped with a dynamic power display via the green LED. Depending on the power, the green LED pulses fast or slow. If necessary, you can switch off the dynamic power display via the green LED. |
The green LED is off | The product is not feeding into the utility grid. |
The red LED is glowing | Event occurred If an event occurs, a distinct event message and the corresponding event number will be displayed in addition on the product user interface or in the communication product (e.g. SMA Data Manager). |
The blue LED flashes slowly for approx. 1 minute | Communication connection is being established The product is establishing a connection to a local network or is establishing a direct connection to a smart device via Ethernet (e.g. smartphone, tablet or laptop). |
The blue LED is glowing | Communication active There is an active connection with a local network or there is a direct connection via Ethernet with a smart end device (e.g. smartphone, tablet or laptop). |
Also see: