Additionally Required Materials and Equipment

Profile rail (length: min. 770 mm, depth: 40 mm to 60 mm, height: 50 mm to 83 mm)

2

For mounting the product

Terminal lugs (flange hole: M10)

2/4

For connecting the DC cables

Field-assembly RJ45 connector with metal enclosure

1-2

Only required if the network cables are not equipped with RJ45 plugs

Means of transport (e.g. pallet truck)

1

Used to transport packed product to mounting location

Eye bolt (M10)

2

Only required if the product is to be transported with a hoist

Hoist

1

Only required if the product is to be transported with a hoist

Utility knife

1

Used to unpack the product

Torx screwdriver (TX25)

1

Used to attach and remove transport handles

Torx screwdriver (TX40)

1

Used to attach the mounting brackets, to attach the product to the mounting brackets, to attach the connection plate to the product, to connect additional grounding

Allen key (AF8)

1

To attach and remove the enclosure lid and to connect the AC cables

Allen key (AF16)

1

To connect the DC cables

Measuring device with a measuring range designed for the maximum AC and DC voltage of the product

1

For verifying that no voltage is present

Current clamp

1

For verifying that no voltage is present

Press tool

1

Used to attach terminal lugs to DC cables

Clean cloth

1

Used to clean terminal lugs

Ethanol cleaning agent

1

Used to clean terminal lugs

Brush

1

Used to clean aluminum conductor (only necessary if cable is made of aluminum)

Protective grease

1

Used to apply to aluminum conductor (only necessary if cable is made of aluminum)