Logging into the user interface for the first time

Password assignment for user and installer

The passwords for the user groups Installer and User must be assigned when accessing the user interface for the first time. If the inverter was registered in a System Manager (e.g. SMA Data Manager) and the system password was assigned, the system password is also the installer password. In this case, only the user password must be assigned.

  1. If you as a specialist assign the user password, only pass the password on to persons to access the inverter data via the user interface.
  2. If you as a user assign the installer password, only pass the password on to persons to receive access to the system.

Installer password for inverters registered in a System Manager or in Sunny Portal

To be able to register the inverter in a System Manager (e.g. SMA Data Manager) or in a Sunny Portal system, the password for the user group Installer must match the system password. If you assign a password for the user group Installer via the user interface of the inverter, the same password must also be used as the system password.

  1. Assign a uniform installer password to all SMA devices in the system.

Procedure:

  1. In the drop-down list Language, select the desired language.
  2. In the Password field, enter a password for the User user group.
  3. In the Repeat password field, enter the password again.
  4. Click on Save.
  5. In the New password field, enter a password for the Installer user group. Assign a uniform password to all SMA devices to be registered in a system. The installer password is also the system password.
  6. In the Repeat password field, enter the password again.
  7. Click on Save and log in.
  • The Configuring the Inverter page opens.

    Also see:

    Commissioning the Inverter
    Carry out the configuration using the installation assistant