Changing the Display Language

Qualified person

If the language for the country data set is not the language you want to use, you can change the display language as follows:

Procedure:

  1. DANGER

    Danger to life due to high voltages

    1. Disconnect the inverter from all voltage sources and open the enclosure lid ( > Disconnecting the Inverter from Voltage Sources).
  2. Determine the rotary switch setting for the desired display language. Call up the Technical Information "Overview of the Rotary Switch Settings" at www.SMA-Solar.com.
    3. 693740300
  3. Set the rotary switch A to 0 using a flat-blade screwdriver (blade width: 2.5 mm). This ensures that the selected data country set remains unchanged.
  4. Set the rotary switch B to the required language using a flat-blade screwdriver (blade width: 2.5 mm).
  5. Recommission the inverter (see service manual at www.SMA-Solar.com).
  • The inverter adopts the settings after commissioning. This can take up to five minutes.
    <  Configuration Procedure
    >  Connecting the Inverter to the Network