Configuring the Country Data Set

Qualified person

Set the country data set appropriate for your country or purpose within the first ten feed-in hours via the rotary switches in the inverter. After the first ten feed-in hours, the country data set can only be changed by means of a communication product.

A display language is assigned to every country data set. If the display language of the country data set does not match the required language, you can change it after commissioning ( > Changing the Display Language).

Procedure:

  1. Determine the rotary switch position for your country and purpose. Call up the Technical Information "Overview of the Rotary Switch Settings" at www.SMA-Solar.com.

  2. DANGER

    Danger to life due to high voltages

    1. Ensure that the inverter is disconnected from all voltage sources and that the enclosure lid is removed ( > Disconnecting the Inverter from Voltage Sources).
    693568268
  3. Set the rotary switches A and B to the required position using a flat-blade screwdriver (blade width: 2.5 mm).
  • The inverter will adopt the setting after commissioning. This can take up to five minutes.
    <  Commissioning Procedure
    >  Setting the NetID