Updating Firmware with Update File via the User Interface

Qualified person

Requirements:

  • An update file with the desired inverter firmware must be available. You can download the update file from the product page under www.SMA-Solar.com.

  • You are logged in on the user interface as Installer or Administrator.

Procedure:

  1. Select the inverter via the focus navigation.
  2. Select the menu Configuration > Update and backup.
  3. In the Manual update area, click [Select file] and select the update file for the product.
  4. The user interface confirms that the update file is compatible.
  5. If the user interface does not confirm the compatibility of the update file, replace the update file.
  6. Select [Start update].
  7. Follow the instructions in the dialog.
  8. Open the user interface and check the events to see whether the firmware update has been completed successfully.

    Also see:

    Configuring Modbus
    Activating Speedwire encryption of the system communication