Establishing a Connection via Ethernet in the local network

New IP address for connecting with a local network

If the product is connected to a local network (e.g. via a router), the product will receive a new IP address. Depending on the type of configuration, the new IP address will be assigned automatically by the DHCP server (router) or manually by you. Upon completion of the configuration, the product can only be reached via the following access addresses:

  1. Generally applicable access address: IP address manually assigned or assigned by the DHCP server (router) (identification via network scanner software or network configuration of the router).
  2. Access address for Windows and Android systems: https://SMA[serial number] (e.g. https://SMA0123456789)

Requirements:

  • The product must be connected to the local network via a network cable (e.g. via a router).

  • The product must be integrated into the local network. Tip: There are various methods of integrating the product into the local network with the aid of the installation assistant.

  • The end device (e.g. laptop or tablet) must be in the same local network as the product.

Procedure:

  1. Open the web browser of your end device.
  2. Enter the IP address of the product into the address bar and press the enter key.

  3. Web browser displays warning

    After the access address of the product has been entered, a message might appear indicating that the connection to the user interface of the product is not secure.

    1. Continue loading the user interface (scroll to bottom and click proceed/advance).
  • The login page of the user interface opens.

    Also see:

    Establishing a Direct Connection via Ethernet
    Connection in the local network