Additionally Required Materials and Equipment

Screws suitable for the mounting base

4

For attaching the wall mounting bracket to the mounting base

Washers suitable for the mounting base

4

For attaching the wall mounting bracket to the mounting base

Screw anchors suitable for the mounting base

4

For attaching the wall mounting bracket to the mounting base

Terminal lugs (flange hole: M10)

2

For connecting the DC cables

Field-assembly RJ45 connector with metal enclosure

1-2

Only required if the network cables are not equipped with RJ45 plugs

Means of transport (e.g. pallet truck)

1

Used to transport packed product to mounting location

Eye bolt (M10)

2

Only required if the product is to be transported with a hoist

Hoist

1

Only required if the product is to be transported with a hoist

Utility knife

1

Used to unpack the product

Torx screwdriver (TX25)

1

Used to attach and remove transport handles

Torx screwdriver (TX40)

1

Used to attach the mounting brackets, to attach the product to the mounting brackets, to attach the connection plate to the product, to connect additional grounding

Allen key (AF8)

1

Used to connect AC cables

Allen key (AF10)

1

Used to attach and remove cover of the enclosure

Measuring device with a measuring range designed for the maximum AC and DC voltage of the product

1

For verifying that no voltage is present

Current clamp

1

For verifying that no voltage is present

Press tool

1

Used to attach terminal lugs to DC cables

Clean cloth

1

Used to clean terminal lugs

Ethanol cleaning agent

1

Used to clean terminal lugs

Brush

1

Used to clean aluminum conductor (only necessary if cable is made of aluminum)

Protective grease

1

Used to apply to aluminum conductor (only necessary if cable is made of aluminum)

Ripple control receiver

1

Only required if a ripple control receiver is to be installed

External I/O system for the ripple control receiver

1

Only required if a ripple control receiver is to be installed