Carry out the configuration using the installation assistant

Qualified person

The installation assistant helps you to configure the inverter and guides you to the most important settings.

Requirements:

  • You are logged in as Installer, and the user interface is open on the Configuring the Inverter page.

  • When configuring after completion of the first ten feed-in hours, the SMA Grid Guard code must be available in order to change the grid-relevant parameters. You can request the SMA Grid Guard code via the Online Service Center.

Procedure:

  1. Select the configuration option Configuration with Installation Assistant.
  2. The installation assistant will open.
  3. For every setting made in a step, select [Save and next].
  4. In the last step, all made settings are listed in a summary.
  5. To correct settings you made, select [Back], navigate to the desired step, correct settings and select [Save and continue].
  6. Once all settings are correct, select [Next] in the summary.
  7. To save the settings to a file, select [Export a summary] and save the file on your smart device.
  8. To export all parameters and their settings, select [Export all parameters]. This exports all parameters and their settings into an HTML file.
  • The start page of the user interface opens.

    Also see:

    Logging into the user interface for the first time
    Adopting the Configuration from a File