Establishing a Connection via Ethernet in the local network

Does not apply to the SMA Data Manager M.

Requirements:

  • The product must be connected to the local network via a network cable (e.g. via a router).
  • The product must be integrated into the local network. Tip: You can change the network configuration on the welcome page of the product.
  • A smart terminal device (e.g., laptop) must be available.
  • The smart terminal device must be in the same local network as the product.
  • The respective latest version of one of the following web browsers must be installed on the smart terminal device: Chrome, Edge, Firefox or Safari.

    Procedure:

    1. Open the web browser of your smart terminal device.
    2. Enter the access address of the product in the address bar of the web browser.

    3. Web browser displays warning

      After the access address of the product has been entered, a message might appear indicating that the connection to the user interface of the product is not secure.

      1. Continue loading the user interface (scroll to bottom and click proceed/advance).
    • When you connect to the user interface for the first time, the welcome page opens. The Commissioning Assistant for configuring the product can be started via the welcome page.
    • The login page of the user interface opens if the product has already been configured.

      Also see:

      Access addresses for the product in the local network
      Establishing a Connection via WLAN in the Local Network