Establishing a direct Wi-Fi connection with WPS

Requirements:

  • A smart device (e.g., laptop) with WPS function must be available.

Procedure:

  1. Enable the WPS function on the inverter. To do this, tap on the enclosure lid of the inverter twice.
  2. The blue LED flashes slowly for approx. 2 minutes. The WPS function is active during this time.
  3. Ensure that the WPS function is enabled on your smart device.
  4. When you connect to the user interface for the first time, the welcome page opens. The Commissioning Assistant for configuring the product can be started via the welcome page.
  5. The login page of the user interface opens if the product has already been configured.
  6. If the login page of the user interface does not open, enter the IP address https://192.168.12.3 or, if your smart terminal supports mDNS services, SMA[serial number].local or https://SMA[serial number] in the address bar of the web browser.

    Also see:

    Establishing a direct Wi-Fi connection with the 360° app
    Establishing direct Wi-Fi connection with Wi-Fi network search