Establishing a Connection via WLAN in the Local Network


New IP address for connecting with a local network

If the product is connected to a local network (e.g. via a router), the product will receive a new IP address. Depending on the type of configuration, the new IP address will be assigned automatically by the DHCP server (router) or manually by you. Upon completion of the configuration, the product can only be reached via the following access addresses:

  1. Generally applicable access address: IP address manually assigned or assigned by the DHCP server (router) (identification via network scanner software or network configuration of the router).
  2. Access address for Apple and Linux systems: https://SMA[serial number].local (e.g. https://SMA0123456789.local)
  3. Access address for Windows and Android systems: http://SMA[serial number] (e.g., http://SMA0123456789)

Requirements:

  • The product must be commissioned.

  • The product must be integrated into the local network. Tip: There are various methods of integrating the product into the local network with the aid of the installation assistant.

  • A smart device (e.g. smartphone, tablet or laptop) must be available.

  • The smart device must be in the same local network as the product.

  • The respective latest version of one of the following web browsers must be installed on the smart device: Chrome, Edge, Firefox or Safari.

  • The installer's SMA Grid Guard code must be available to change network-relevant settings after the first 10 hours of feed-in operation, or after completing the installation assistant. You can request the SMA Grid Guard code via the Online Service Center.

Importing and exporting files with smart devices having an iOS operating system is not possible

For technical reasons, importing and exporting files (e.g., importing an inverter configuration, saving the current inverter configuration or exporting events and parameters) is not possible with smart devices having an iOS operating system.

  1. Use a smart device that does not have an iOS operating system for importing and exporting files.

Procedure:

  1. Enter the IP address of the product in the address bar of the web browser.
  2. The login page of the user interface opens.