Activate WPS Function


The WPS function can be used for different purposes:

  • Automatic connection to a network (e.g. via router)

  • Direct connection between the product and a smart device

Depending on the intended application of the WPS function, the procedure for activation will vary.

Activating WPS function for automatic connection to a network

Requirements:

  • WLAN must be activated in the product.

  • WPS must be activated on the router.

Procedure:

  1. Open the user interface Establishing a connection to the user interface).
  2. Log in as Installer.
  3. Start the installation assistant Starting the Installation Assistant).
  4. Select Network configuration.
  5. Select WPS for WLAN network button in the WLAN tab.
  6. Select Activate WPS.
  7. Select Save and next and exit the installation assistant.
  • The WPS function is activated and the automatic connection to the network can be established.

Activating the WPS function for direct connection to the smart device.

  • Tap on the enclosure lid of the product twice. This will activate the WPS function on the product for about 2 minutes. Activation is signaled by rapid flashing of the blue LED.