Supported Products

Supported SMA Products

Availability of SMA products in your country

Not all SMA products are available in all countries. For information on whether an SMA product is available in your country, contact your distributor.

Inverters:

  • All SMA inverters with integrated or retrofitted Speedwire/Webconnect interfaces are supported. Information on whether an SMA inverter has an integrated Speedwire/Webconnect interface or can be retrofitted with a Speedwire/Webconnect interface can be found on the SMA inverter product page at www.SMA-Solar.com.

    All SMA central inverters with integrated Modbus interfaces are supported.

Other products:

Supported Products from Other Manufacturers

Energy meters:

  • Power Analyser of the UMG 604 series from Janitza electronics GmbH

  • WattsOn-Mark II Precision Energy Meter from Elkor Technologies Inc.

  • PowerLogic ION7550 / ION7650 / ION8600 / ION8650 / ION8800 from Schneider Electric

External I/O Systems:

Sensors (only in conjunction with external I/O systems):

  • Irradiation sensors that can output a current signal in the range from 4 mA to 20 mA

  • Anemometers that can output a current signal in the range from 4 mA to 20 mA

  • Temperature sensors with a Pt100 measuring shunt

The linearization of the temperature sensors' data takes place in the I/O system. In the case of solar irradiation sensors and anemometers, however, the sensor itself must be designed for a linearization of the data.

Signal receivers and digital signal sources:

  • Signal sources with relay contacts

Routers and network switches:

  • Routers and network switches for Fast Ethernet with a data transfer rate of at least 100 Mbit/s. All network components used must support version 2 or version 3 (IGMPv2 or IGMPv3) of the IGMP protocol. Do not use an IGMP Snooping Switch as per RFC 4541.

    <  IMPORTANT SAFETY INSTRUCTIONS
    >  Scope of Delivery