Mounting the Product on the DIN Rail

There are two options for mounting the product on the DIN rail:

  • Mounting the product with the back to the DIN rail

  • Mounting the product with the top to the DIN rail

Additionally required mounting material (not included in the scope of delivery):

  • Top-hat rail (TH 35-7.5)

Requirement:

  • The top-hat rail must be securely mounted.

Mounting the product with the back to the DIN rail

    5653588876
  1. Attach the mounting plate to the back of the product using four of the supplied screws. Ensure that four of the six central drill holes are at the bottom and the other two drill holes at the top.
    2. 5653635724
  2. Attach the DIN rail bracket to the mounting plate using six of the supplied screws.
    3. 5653644172
  3. Position the product onto the DIN rail from above and press on the bottom.
  4. The product snaps audibly into place.
  5. Ensure that the product is securely in place.

Mounting the product with the top to the DIN rail

    5653743372
  1. Attach the DIN rail bracket to the top of the product using four of the supplied screws. Make sure that the lock for releasing the DIN rail bracket protrudes over the outer edge of the product.
    2. 5684070284
  2. Position the product onto the DIN rail from above and press on the bottom.
  3. The product snaps audibly into place.
  4. Ensure that the product is securely in place.
    <  Requirements for Mounting
    >  Mounting the Product on the Wall