Product Description


The Sunny Tripower is a transformerless PV inverter, with 2 MPP trackers, that converts the direct current of the PV array to grid-compliant, three-phase current and feeds it into the utility grid.

984761228

Position

Explanation

A

Thread for screwing in the two eye bolts for transporting the inverter with a crane

B

Type label

The type label uniquely identifies the inverter. You will require the information on the type label to use the product safely and when seeking customer support from Service. You will find the following information on the type label:

  • Device type (Model)

  • Serial number (Serial No.)

  • Date of manufacture

  • Device-specific characteristics

C

Ventilation grid

D

Recessed grip

E

LEDs

The LEDs indicate the operating state of the inverter LED Signals).

F

Display

The display shows the current operating data and events or errors Display Overview).

G

Electronic Solar Switch (ESS)

The ESS and the DC connectors together form a DC load-break switch. When plugged in, the ESS forms a conductive path between the PV array and the inverter. Removing the ESS interrupts the DC electric circuit and removing all DC connectors disconnects the PV array completely from the inverter.

H

Lower enclosure lid

I

Upper enclosure lid

Symbols on the inverter, the ESS and the type label

Symbol

Explanation

Inverter

Together with the green LED, this symbol indicates the operating state of the inverter.

Observe the documentation

Together with the red LED, this symbol indicates an error (for troubleshooting, see the service manual at www.SMA-Solar.com).

BLUETOOTH

Together with the blue LED, the symbol indicates active communication via BLUETOOTH.

Danger

This symbol indicates that the inverter must be additionally grounded if additional grounding or equipotential bonding is required at the installation site Connecting Additional Grounding).

QR Code

Links to additional information on the inverter can be found at www.SMA-Solar.com.

Operating principle of the ESS:

  • If the ESS is plugged in, the DC electric circuit is closed.

  • If an acoustic signals sounds and the display shows an error message that prohibits removing the ESS, wait until dark. The ESS can only be removed once it is dark.

  • If no acoustic signal sounds and the display does not show an error message, the DC electric circuit may be interrupted. To interrupt the DC electric circuit, you must perform the following steps in the given order:

    • Remove the ESS.

    • Unlock and remove all DC connectors.

Danger to life due to high voltages in the inverter; observe the waiting time of 20 minutes.

High voltages that can cause lethal electric shocks are present in the live components of the inverter. Prior to performing any work on the inverter, disconnect it from all voltage sources as described in this document Disconnecting the Inverter from Voltage Sources).

Danger to life due to electric shock

The product operates at high voltages. All work on the product must be carried out by qualified persons only.

Risk of burns due to hot surfaces

The product can get hot during operation. Avoid contact during operation. Allow the product to cool down sufficiently before carrying out any work.

Observe the documentation

Observe all documentation supplied with the product.

Direct current

The product does not have a transformer.

Three-phase alternating current with neutral conductor

WEEE designation

Do not dispose of the product together with the household waste but in accordance with the locally applicable disposal regulations for electronic waste.

CE marking

The product complies with the requirements of the applicable EU directives.

Degree of protection IP65

The product is protected against dust intrusion and water jets from any angle.

The product is suitable for outdoor installation.

Certified safety

The product is VDE-tested and complies with the requirements of the German Equipment and Product Safety Act.

RCM (Regulatory Compliance Mark)

The product complies with the requirements of the applicable Australian standards.

Korean mark of conformity

The product complies with the requirements of the applicable Korean directives.