Requirements on the SPS OUT AC cable for connection to the inverter

  • Conductor type: copper wire

  • Permissible temperature: at least 90°C

  • The conductors must be solid or stranded wire.

  • Conductor cross-section: 1.5 mm² to 2.5 mm²

  • Outer diameter: max. 9 mm

  • Insulation stripping length: 8 mm to 10 mm

  • Maximum length of conductors: 30 m

  • The cable type and cable-laying method must be appropriate for the application and location.

    SPS IN signal cable requirements
    Requirements on the AC cables for the connections to the battery back-up loads and to the utility grid