Activating SMA Premium via Sunny Portal

Requirements:

  • The system must be captured in Sunny Portal powered by ennexOS.
  • The System Manager must be configured.
  • An energy meter must be installed at the point of interconnection.
  • A battery must be installed in the system.
  • Depending on normative requirements, the limitation at the point of interconnection must be correctly set.

    Procedure:

    1. Ensure that no Sunny Home Manager 2.0 is configured as a main device in the system.
    2. Make location settings. Go to [System properties] via [Configuration].
    3. Enter the details regarding the Location and PV modules.
    4. In the External access area, check the External parameterization and set Data communication to High if other settings are currently saved.
    5. In the Automatic updates area, enable the settings of all SMA products.
    6. Configure the tariff settings via [Configuration] > [Tariffs].
    7. Go to [Energy management] via [Configuration].
    8. In the Energy Maximizer area, click the button [Test for free].
    9. You will be forwarded to the final page.
    10. Follow the instructions on the interface.
    11. The free trial period has been activated.
    12. Go to [Configure] via [Configuration] > [Energy Management] in the Energy Maximizer section. There, check the settings in the Peak load shaving area and adjust if necessary.
    13. Confirm with [Activate].
    • SMA Premium is active and can be viewed under [Configuration] > [Digital Products]. After the trial period (90 days) ends, SMA Premium terminates automatically and does not convert into a subscription service. To continue using SMA Premium, a user with the role of "Owner" must actively purchase a paid SMA Premium subscription during or after the trial period.

      Also see:

      Configure energy management
      Canceling SMA Premium