Additionally Required Materials and Equipment
Material or equipment | Quantity | Explanation |
|---|---|---|
Screws suitable for the mounting base | 4 | For attaching the wall mounting bracket to the mounting base |
Washers suitable for the mounting base | 4 | For attaching the wall mounting bracket to the mounting base |
Screw anchors suitable for the mounting base | 4 | For attaching the wall mounting bracket to the mounting base |
Terminal lugs (flange hole: M10) | 2 | For connecting the DC cables |
Conduit (trade size: 74.8 mm (3 in)) or smaller with suitable reducer bush) for the DC connection | 1 | Only necessary if DC cables must be laid in one conduit |
Rain-tight conduit fitting or conduit fitting for wet locations (trade size: 74.8 mm (3 in)) or smaller with suitable reducer bush) for DC connection | 1 | Only necessary if DC cables must be laid in one conduit |
Conduit (trade size: 74.8 mm (3 in) or smaller with suitable reducer bush) for AC connection | 1 | Only necessary if AC cables must be laid in one conduit |
Rain-tight conduit fitting or conduit fitting for wet locations (trade size: 74.8 mm (3 in) or smaller with suitable reducer bush) for DC connection | 1 | Only necessary if AC cables must be laid in one conduit |
Conduit (trade size: 27.8 mm (1 in) or smaller with suitable reducer bush) for network connection | 1-2 | Only necessary if network cables must be laid in one conduit |
Rain-tight conduit fitting or conduit fitting for wet locations (trade size: 19.05 mm (1 in) or smaller with suitable reducer bush) for network connection | 1-2 | Only necessary if network cables must be laid in one conduit |
Conduit (trade size: 27.8 mm (1 in) or smaller with suitable reducer bush) for battery communication connection | 1 | Only necessary if the battery communication cable must be laid in one conduit |
Rain-tight conduit fitting or conduit fitting for wet locations (trade size: 19.05 mm (1 in) or smaller with suitable reducer bush) for battery communication connection | 1 | Only necessary if the battery communication cable must be laid in one conduit |
Field-assembly RJ45 connector with metal enclosure | 1-2 | Only required if the network cables are not equipped with RJ45 plugs |
Means of transport (e.g., pallet truck) | 1 | Used to transport packed product to mounting location |
Eye bolt (M10) | 2 | Only required if the product is to be transported with a hoist |
Hoist | 1 | Only required if the product is to be transported with a hoist |
Utility knife | 1 | Used to unpack the product |
Torx screwdriver (TX25) | 1 | Used to attach and remove transport handles |
Torx screwdriver (TX40) | 1 | Used to attach the mounting brackets, to attach the product to the mounting brackets, to attach the connection plate to the product, to connect additional grounding |
Allen key (AF8) | 1 | Used to connect AC cables |
Allen key (AF10) | 1 | Used to attach and remove cover of the enclosure |
Measuring device with a measuring range designed for the maximum AC and DC voltage of the product | 1 | For verifying that no voltage is present |
Current clamp | 1 | For verifying that no voltage is present |
Press tool | 1 | Used to attach terminal lugs to DC cables |
Clean cloth | 1 | Used to clean terminal lugs |
Ethanol cleaning agent | 1 | Used to clean terminal lugs |
Brush | 1 | Used to clean aluminum conductor (only necessary if cable is made of aluminum) |
Protective grease | 1 | Used to apply to aluminum conductor (only necessary if cable is made of aluminum) |
Ripple control receiver | 1 | Only required if a ripple control receiver is to be installed |
External I/O system for the ripple control receiver | 1 | Only required if a ripple control receiver is to be installed |