Switching the Dynamic Power Display Off


As standard, the product signals its power dynamically via the pulsing of the green LED. When doing so, the LED flashes on and off uniformly or is permanently lit at full power. The various gradations are related here to the set active power limit of the product. If this display is not desired, switch this function off in accordance with the following procedure. Once this has been done, the green LED is lit permanently to signalize feed-in operation.

The basic procedure for changing operating parameters is explained in another section Changing Operating Parameters).

Procedure:

  • In the parameter group Device > Operation, select the parameter Dynamic power display via green LED and set this to Off.