Symbols on the Inverter
Symbol | Explanation |
|---|---|
| Beware of a danger zone This symbol indicates that the product must be additionally grounded if additional grounding or equipotential bonding is required at the installation site. |
| Beware of electrical voltage The product operates at high voltages. |
| Beware of hot surface The product can get hot during operation. |
| Danger to life due to high voltages in the inverter; observe a waiting time of 5 minutes. High voltages that can cause lethal electric shocks are present in the live components of the inverter. Before carrying out any work on the inverter, always de-energize the inverter as described in this document and secure it against reconnection. |
| Observe the documentations Observe all documentations supplied with the product. |
| Inverter Together with the green LED, this symbol indicates the operating state of the inverter. |
| Observe the documentation Together with the red LED, this symbol indicates an error. |
| Data transmission Together with the blue LED, this symbol indicates the status of the network connection. |
|
|
Grounding conductor This symbol indicates the position for connecting a grounding conductor. |
| Three-phase alternating current with neutral conductor |
| Direct current |
| The product has no galvanic isolation. |
| WEEE designation Do not dispose of the product together with the household waste but in accordance with the disposal regulations for electronic waste applicable at the installation site. |
| The product is suitable for outdoor installation. |
|
|
Degree of protection IP65 The product is protected against the penetration of dust and water that is directed as a jet against the enclosure from all directions. |
| CE marking The product complies with the requirements of the applicable EU directives. |
| UKCA marking The product complies with the regulations of the applicable laws of England, Wales and Scotland. |
| RoHS labeling The product complies with the requirements of the applicable EU directives. |
