LED Signals
LED signal | Explanation |
---|---|
Green LED and red LED flash simultaneously (2 s on and 2 s off) | No country data set set Operation of the product is stopped because no country data set is set. Once the configuration has been completed (for instance using the installation assistant or via a communication product), the product will start operation automatically. |
The green LED is flashing (two seconds on and two seconds off) | Waiting for feed-in conditions The conditions for feed-in operation are not yet met. As soon as the conditions are met, the inverter will start feed-in operation. |
The green LED flashes quickly |
Update of central processing unit The central processing unit of the inverter is being updated. |
The green LED is glowing |
Feed-in operation The inverter feeds in with a power of at least 90%. |
The green LED is pulsing |
Feed-in operation The inverter is equipped with a dynamic power display via the green LED. Depending on the power, the green LED pulses fast or slow. If necessary, you can switch off the dynamic power display via the green LED. |
The green LED is off | The inverter is not feeding into the utility grid. |
The red LED is glowing | Event occurred If an event occurs, a distinct event message and the corresponding event number will be displayed in addition on the product user interface or in the communication product (e.g. SMA Data Manager). |
The blue LED flashes slowly for approx. 1 minute | Communication connection is being established The product is establishing a connection to a local network or is establishing a direct connection to a smart device via Ethernet (e.g. smartphone, tablet or laptop). |
The blue LED flashes quickly for approx. two minutes (0.25 s on and 0.25 s off). |
WPS active The WPS function is active. |
The blue LED is glowing | Communication active There is an active connection with a local network or there is a direct connection via Ethernet with a smart end device (e.g. smartphone, tablet or laptop). |