Commissioning Procedure
Qualified person
Commissioning an inverter that is captured in a communication device
When the inverter is captured in a communication device, the communication device (e.g. SMA Data Manager) is the unit for configuring the total system. The configuration is transferred to all inverters in the system. The system password assigned via the communication device is also the password for the user interface of the inverter.
- Commission the inverter ( > Commissioning the Inverter).
- The initial configuration of the inverter is made via the communication device. The configuration is transferred to the inverter and the settings of the inverter are overwritten.
- Deactivate the Webconnect function of the inverter via the Sunny Portal. This prevents unnecessary connection attempts of the inverter with Sunny Portal.
This section describes the commissioning procedure and gives an overview of the steps you must perform in the prescribed order.
|
Procedure |
See | |
|---|---|---|
|
|
Commission the inverter. | |
|
|
Establish a connection to the user interface of the inverter. There are various connection options to choose from for this:
| |
|
|
Log into the user interface. | |
|
|
Select the inverter configuration option. Please note that the SMA Grid Guard code for changing the grid-relevant parameters must be available after completion of the first ten feed-in hours or installation assistant (see "Application for the SMA Grid Guard code" available at www.SMA-Solar.com). | |
|
|
If necessary, set the parameters for voltage and frequency monitoring. | |
|
|
Ensure that the country data set has been configured correctly. | |
|
|
Make further inverter settings as needed. | |