Mounting the product
There are two options for mounting the product:
Mounting on the top-hat rail
Mounting on a wall
Mounting the Product on the DIN rail
Additionally required mounting material (not included in the scope of delivery):
-
Top-hat rail (TH 35-7.5)
Requirement:
-
The top-hat rail must be securely mounted.
Procedure:
- Place the product onto the DIN rail from above and hook it into place.
- The product snaps audibly into place.
- Ensure that the product is securely in place.
Mounting the Product on the Wall
- Press the four brackets on the back side of the Product out from the inside.
- The brackets snap into place.
- Mark the drill holes using the brackets as a template.
- Drill the holes and insert the provided screw anchors. Do not drill through the brackets.
- Insert the provided screws through the brackets and tighten. Do not damage the brackets.
- Ensure that the product is securely in place.
