LED Signals
The LEDs indicate the operating state of the inverter.
|
LED signal |
Explanation |
|---|---|
|
The green LED is flashing (two seconds on and two seconds off) |
Waiting for feed-in conditions The conditions for feed-in operation are not yet met. As soon as the conditions are met, the inverter will start feed-in operation. |
|
The green LED is flashing: 1.5 s on and 0.5 s off |
Secure power supply operation The secure power supply operation is activated and the inverter supplies the outlet with current from the PV system. |
|
The green LED flashes quickly |
Update of central processing unit The central processing unit of the inverter is being updated. |
|
The green LED is glowing |
Feed-in operation The inverter feeds in with a power of at least 90%. |
|
The green LED is pulsing |
Feed-in operation The inverter is equipped with a dynamic power display via the green LED. Depending on the power, the green LED pulses fast or slow. If necessary, you can switch off the dynamic power display via the green LED. |
|
The green LED is off |
The inverter is not feeding into the utility grid. |
|
The red LED is glowing |
Event occurred In addition to the glowing red LED, the display indicates the following information about the event:
|
|
The blue LED flashes slowly for approx. one minute |
Communication connection is being established The inverter is establishing a connection to a local network or is establishing a direct connection to an end device via Ethernet (e.g. computer, tablet PC or smartphone). |
|
The blue LED flashes quickly for approx. two minutes. |
WPS active The WPS function is active. |
|
The blue LED is glowing |
Communication active There is an active connection with a local network or there is a direct connection with an end device via Ethernet (e.g. computer, tablet PC or smartphone). |