Configuring PV Hybrid Systems with System Assistant

With the system assistant for PV hybrid systems, you can determine the optimum PV share according to system requirements. If no system has been configured, the system assistant start automatically. It creates an optimum proposal in terms of AC and DC power. The proposal can adopted directly or adjusted (if necessary).

To guarantee smooth operation with the gensets, the share of PV power in the PV hybrid system must not exceed the maximum apparent power of 60% of the gensets operated at the same time during the day.

Procedure:

  1. Enter the nominal AC power of the inverters.
  2. Enter the peak power of the inverters.
  3. The current estimation results are calculated and shown.
  4. To calculate the system proposal, click on [OK].
  • On the page Configure PV system, the proposals for the inverters and, if necessary, possible change notes are shown. These changes can be directly made on the page ( > Configuring the PV System).
    Configuring Off-Grid Systems with System Assistant
    Viewing Design Suggestions