Configuring Off-Grid Systems with System Assistant
A valid system configuration for an off-grid system is calculated based on your project-related requirements and specifications. This system configuration can be adjusted manually to better meet you needs.
Requirements and specifications
- Select whether the system must be able to withstand the conditions of the month with the most unfavorable weather.
- Enter the nominal power ratio.
- Enter the required autonomous time.
- If requested, click on Take gensets into account and make the respective settings.
- Enter the required solar coverage rate.
- To adopt these changes for the system proposal, click on [Calculate system proposal].
System proposal
- If requested, change settings for nominal AC power of PV inverter and storage system, usable storage capacity, and battery type.
- To calculate the design parameter using the current settings, click on [Recalculate].
- The dialog box Design for inverter design opens after closing the system assistant ( > Viewing Design Suggestions).