Configuring Battery Systems
Storage system area
Depending on the selected inverter, up to 3 different batteries can be selected here.
Procedure:
- If a three-phase system has been selected, enable the checkbox Multicluster-Box on the page Battery system, and select the required device type of the Multicluster-Box from the drop-down list (if required).
- Select the required battery inverter from the drop-down list Devices.
- With multicluster systems, click on [+ add cluster] to add additional clusters. With multicluster systems, all batteries are automatically configured identically.
- To adjust the parameters of a battery, click on the field Settings in the row of the required battery.
- The dialog box Configure battery opens.
- Select the required battery type from the drop-down list Batteries.
- If required, change the other settings for the battery.
- Click on [Accept changes].
- For stand-alone grid projects: Check the system compatibility under Details.
Section: Next steps
Project type | Next steps |
---|---|
| |
|