Defining Load Profiles
You can select typical load profiles or create and edit your own load profiles. 2 load profiles can be combined in case of off-grid and self-consumption projects. 5 templates can be combined in case of energy systems. In the menu My Sunny Design > Own load profiles, you can create or manage your own load profiles.
Section: Load profile details
Detailed planning |
- Under Load profile type, select the required option. You can only select the option Own load profile if you have already created an own load profile ( > Own Load Profiles).
- Select the required load profile from the drop-down list Load profile. To get information on the selected load profile, click on [Profile information].
- If required, adjust the setting in the field Annual energy consumption.
- To edit the load profile, click on [Edit load profile] under Own load profile. Then adjust the load profile.
Only with off-grid projects:
Sunny Design calculates an expected output of 30 minutes from the sum of defined load profiles. You can define a power reserve here to ensure that your system is supplied with energy as planned during peak loads.
Procedure:
- Enter the expected peak load under Specification peak load.
Section: Specific loads
Detailed planning |
- If you are using a heat pump, activate the checkbox Heat pump and, from the drop-down list, select the use of the heated water.
- Under Hot water requirement, enter the number of persons and the hot water requirement.
- Under Details of building, enter the type of building, the number of floors and the surface area of each floor.
- To get information on the load profile with heat pump, click on [Profile information]. The button can only be clicked on if the checkbox Heat pump is enabled.
Section: Electric vehicle
Detailed planning |
Self-consumption can be increased using a charging station. You may select 1 charging station and one vehicle for the system. You may also define a new driving profile or select a template.
Procedure:
- If you use an electric vehicle, enable the checkbox Take electric vehicle into account.
- Define the driving profile of the electric vehicle.
- To obtain information on the load profile of the electric vehicle, click on [Profile information]. The button can only be clicked on if the checkbox Take electric vehicle is enabled.
Section: Next steps
Project type | Next steps | |
---|---|---|
| ||
|